JVC EX-A1 Stereo System User Manual


 
15
Playing discs (continued)
NOTE
Set the remote control mode selector to
AUDIO before using the number buttons.
For a VCD or SVCD, this operation can be carried
out when the disc is stopped, or during playback
without the PBC function.
For a DVD AUDIO, CD, MP3 or JPEG, this operation
can also be carried out when the disc is stopped.
This operation may not be carried out for some
discs.
Designate the chapter number or
track number to play during
playback.
Refer to “How to use the number buttons” on page
16.
Press 7 during playback.
Press 8 during playback.
To resume normal playback, press 3 (play).
Press
8
to pause during JPEG disc slide-show.
Press
3
(play) to start playback from the next file.
It is not possible to pause by pressing 3 /8 on
the main unit during JPEG disc slide-show.
Press 8 during pause.
Each time you press the button, picture will be
advanced frame-by-frame.
There are two methods.
Press 1 or ¡ during playback.
Each time you press the button, the speed
increases (×2, ×5, ×10, ×20, ×60). To restore
the normal speed, press 3 (play).
Hold down 4 or ¢ .
Fast reverse/Fast forward search can be carried
out only while the button is pressed ( ×5 ×20).
NOTE
Fast reverse/Fast forward search cannot be carried
out for MP3 and JPEG.
For a DVD VIDEO, SVCD or VCD, no sound comes
out during fast reverse/fast forward search.
For a CD or DVD AUDIO, sound is intermittent
during fast reverse/fast forward search.
Select what you want to
play by using the number
buttons
Number
buttons
Cursor
(5 // )
To stop playback
To pause playback
To advance picture
frame-by-frame
Fast reverse/Fast forward
search
3 (Play button)
EXA1mkII[UJ]-03.fm Page 15 Wednesday, October 13, 2004 3:59 PM