Filter
Top Products
5
English
Now you can plug the AC power cord into the wall outlet, and your CA-D622T is at your command!
(Please refer to instructions for speakers as will when you connect speakers.)
Connecting the Speakers
For each speaker, connect one end of the speaker wire to the speaker terminals on the back of the
CA-D622T and the other end to the speaker.
1. Open each of the terminals and insert the speaker wires firmly (be sure to remove the insulation
at the end of each wire first), then close the terminals.
2. Connect the red (+) and black (–) terminals of the right side speaker to the red (+) and black (–)
terminals marked RIGHT on the CA-D622T.
Connect the red (+) and black (–) terminals of the left side speaker to the red (+) and black (–)
terminals marked LEFT on the CA-D622T.
IMPORTANT: Use speakers with the correct impedance only. The correct
impedance is indicated on the back panel.
CAUTION: If a TV is installed near speakers, the TV may display irregular colors.
In this case, set the speakers away from the TV.
Connecting the SUB WOOFER
Connect the Sub-Woofer to the SUBWOOFER
OUT terminal.
Connecting a VCR
Connect the VCR to the VCR terminal.
SUBWOOFER
OUT
RIGHT LEFT
VCR
IN
(PLAY)
OUT
(REC)
AUDIO INAUDIO OUT
CAUTION: Make all connections before plugging the Unit into an AC power outlet.
Right speaker
SPEAKERS
RIGHT LEFT
+
–
+
–
Left speaker
123
PROGRAM
/ RANDOM
REPEAT
EDIT
DISC
DISC
DISC
PLAY & EXCHANGE SYSTEM
DISC
DISC
DISC
SET CANCEL
SOUND MODE
SEA CONTROL
TIMER/CLOCK
MULTI CONTROL
MX-D622T
COMPACT COMPONENT SYSTEM
AUTO POWER OFF
V
O
L
U
M
E
CD
FM/AM
TAPE
VCR
DEMO
S.A. BASS
DOLBY B
NR
REVERSE
MODE
AB
DECK A/B
CD REC STARTREC
START/STOP
DUBBING
DECK CONTROL
STANDBY
PHONES
POWER
PLAY REC/PLAY
AB
AUTO REVERSE AUTO REVERSE
DISC
3
TRIPLETRAY
COMPACT
DIGITAL AUDIO
DOLBY B NR
COMPU
PLAY
CONTROL
Laying Out the Unit
Leave a space of at least 1 cm on
both sides of the Unit and at least
10 cm at the back, for ventilation.
1 cm (7/16”) 1 cm (7/16”)
EN01-38.CA-D322T[C]/F 2/12/98, 10:27 AM5