Filter
Top Products
18
English
2. Select a disc with the DISC buttons (1 to 3).
The display changes to the Program Entry display and the disc number and track number
sections blink for a few seconds.
❏ While the display is blinking, perform the operations in steps 3 to 4. When the blinking
display changes to the “PROGRAM” display, repeat the operations in steps 2 to 4.
3. Select a track for the program by adjusting the MULTI CONTROL stick left or right.
The track number appears on the display.
4. Press the SET button.
The blinking disc number and track number changes to a steady light, and the step number is
displayed.
5. Repeat steps 2 to 4 to select the other tracks for the program.
❏ To select another track from the same disc, repeat the procedure from step 3.
6. Press the ‹/8 or CD button.
The Unit plays the tracks in the order you have programmed them.
Using the Remote Control
1. Press the PROGRAM/RANDOM button on the Unit.
The message “PROGRAM” appears in the display and the PROGRAM indicator comes on.
If you have already created a program, the last step of the previous program is displayed.
❏ The display changes with each press of the PROGRAM/RANDOM button, as shown below.
→ PROGRAM → RANDOM → Off (Continuous Play) → (back to the beginning)
2. Select a disc with the DISC buttons (1-3).
The display changes to the Program Entry display and the disc number and track number
sections blink for a few seconds.
❏ While the display is blinking, perform the operations in step 3. When the blinking display
changes to the “PROGRAM” display, repeat the operations in steps 2 to 3.
DISC
DISC
DISC
Track
number
Disc
number
Step
number
SOUND
MODE
PROGRAM
VOL
CD
SOUND
MODE
PROGRAM
VOL
CD
SOUND
MODE
PROGRAM
6
VOL
CD
SET
SOUND
MODE
PROGRAM
VOL
CD
PROGRAM
/ RANDOM
DISC
DISC
DISC
Track
number
Disc
number
Step
number
SOUND
MODE
PROGRAM
VOL
CD
EN01-38.CA-D322T[C]/F 2/12/98, 10:29 AM18