Filter
Top Products
8
English
or
Adjusting the Volume
Turn the VOLUME control clockwise to increase the volume or anticlockwise to decrease it.
Turning the VOLUME control quickly also adjusts the volume level quickly.
When using the Remote Control, press the VOLUME + button to increase the volume or press the
VOLUME – button to decrease it.
You can adjust the volume level between 0 and 50.
❏ When the CA-D622T is turned on from Standby mode, the volume is set to 0 and automatically
increases to the previous volume level. To stop this automatic volume adjustment, turn the
VOLUME control slightly or press the VOLUME button on the Remote Control.
For private listening
Connect a pair of headphones to the PHONES jack. No sound comes out of the speakers.
Be sure to turn down the volume before connecting or putting on headphones.
FADE MUTING Function ——————————————————————
Set the Volume Level to 0 by pressing the FADE MUTING button on the Remote Control. Press this
button again to restore the Volume Level to its previous level.
Balance adjustment ————————————————————————
You can use the Remote Control to adjust the left and right balance of the speakers.
1. Press the SHIFT button.
2. Press the L BALANCE R buttons (10 or +10).
The display changes to show the balance adjustment.
Pressing the L button (10) moves the pointer to the left, pressing the R button (+10) moves the
pointer to the right.
❏ The balance is normally set to the center position.
Note: If no adjustments are made for 5 seconds in balance adjustment mode, the display reverts to
the previous display. Once the balance adjustment is performed, the number keys on the Remote
Control enter balance adjustment mode. To use the number keys for tuner, press the TUNER button.
To use them for CD player, press the CD £ button.
S.A. Bass Mode
The richness and fullness of the bass sound is maintained regardless of how low you set the volume.
The degree of bass is automatically controlled to suit the music source being played back. You can
use this effect only for playback.
To get the effect, press the S.A. BASS (Signal Adaptive Bass) button repeatedly until the S.A. Bass
mode you want appears on the display. The S.A. BASS indicator loghts up.
→ S.A.BASS 1 → S.A. BASS 2 → OFF → (back to the beginning)
To cancel the effect, press the same button until “OFF” appears on the display. The S.A. BASS
indicator goes out.
V
O
L
U
M
E
VOLUME
FADE
MUTING
SHIFT
10
10
L BALANCE R
Display when set for no
sound from the right speaker.
Display when set for no
sound from the left speaker.
Display at the
center position.
S.A. BASS
EN01-38.CA-D322T[C]/F 2/12/98, 10:28 AM8