Filter
Top Products
7
Daily Operations
—Playback
¥
Turn on the power.
The STANDBY lamp on the main unit goes off.
• Without pressing AUDIO, the System also turns
on by pressing one of the source select buttons in the
next step.
ø
Select the source.
Playback automatically starts if the selected source is
ready to start playback.
• If you press AUX, start playback on the external
component.
π
Adjust the volume.
[
Operate the target source as explained
later.
To turn off (standby) the System
Canceling the Demonstration
To start the demonstration,
select DEMO START.
In this manual, the operations using the remote control
are mainly explained; however, you can use the buttons
and controls on the main unit if they have the same (or
similar) name and marks.
3
1
2
AUDIO
AUDIO VOL
AUX
DVD/CD TAPE-A TAPE-B FM/AM
123
456
789
10 0 +10
DISC 1 –
DISC 5
TOP MENU
MENU
FM MODE /
ENTER
RETURN
REVERSE
MODE
GROUP/TITLE
SET
////
3
1
2
AUDIO
TV
Number buttons
The STANDBY lamp on the main unit
lights in red.
•A small amount of power is always
consumed even while on standby.
• You can reduce the standby power
consumption by activating the ECO
mode (see page 16).
For private listening
Connect a pair of headphones to the PHONES jack on the
main unit. The sound will no longer come out of the
speakers.
Be sure to turn down the volume before
connecting or putting on the headphones.
• Disconnecting the headphones will activate the
speakers again.
DO NOT turn off (standby) the System with
the volume set to an extremely high level;
otherwise, the sudden blast of sound can
damage your hearing, speakers and/or
headphones when you turn on the System or
start playback.
AUDIO
Main Unit
ONLY
2
sec.
DEMO OFF
DEMO START
DX_T9[J].book Page 7 Tuesday, December 13, 2005 1:53 PM