Filter
Top Products
16
Changing the Display Brightness
*Except for the RHYTHM AX and KARAOKE SCORING
lamps.
Reducing Power Consumption While on
Standby—ECO Mode
You can reduce the power consumption while the System is
turned off (on standby) by activating the ECO mode.
To activate the ECO mode,
press DIMMER
while the System is turned off (on standby).
The display illumination (including the
display demonstration) disappears.
To deactivate the ECO mode,
press DIMMER again while
the System is turned off (on standby). The display
illumination appears.
Setting the Clock
Without setting the build-in clock, you cannot use any
timers.
• To exit from the clock setting, press CLOCK/TIMER as
required.
• To correct a misentry during the process, press CANCEL.
You can return to the previous step.
1
Activate clock setting mode.
• If you have already adjusted the clock before, press the
button repeatedly until the clock time starts flashing.
2
Adjust the hour, then minute.
Now the built-in clock starts working.
Turning Off the Power Automatically
With Sleep Timer, you can fall asleep while listening to
music.
1
Specify the time (in minutes).
2
Wait until the set time goes off.
To check the time remaining until the shut-off time
• If you press the button repeatedly, you can change the
shut-off time.
DIMMER 1
Dims the display and the illumination
on the main unit*.
DIMMER 2
Dims the display (same as DIMMER 1)
and turns off the illumination on the
main unit*.
Remote
ONLY
DIMMER
DIMMER 1 DIMMER 2
DIMMER OFF
(Canceled)
Remote
ONLY
DIMMER
INFO
Remote
ONLY
CLOCK/
TIMER
SET
Remote
ONLY
SLEEP
10 20 30 60 90
120150
Canceled
SLEEP
DX_T9[J].book Page 16 Tuesday, December 13, 2005 1:53 PM