JVC CA-DXJ35 Speaker System User Manual


 
3
Connections
Connect VIDEO OUT directly to the video input of your
TV. Connecting VIDEO OUT to a TV via a VCR may
interfere with your viewing when playing back a copy-
protected source. Connecting VIDEO OUT to an integrated
TV/VCR system may interfere with your viewing.
Do not connect the AC power cord until all other
connections have been made.
Supplied accessories
FM antenna (x1)
AM loop antenna (x1)
Composite video cord (x1)
Remote control (x1)
Batteries (x2)
AC plug adapter (x1)
(not supplied for Australia and the Middle East.)
If any item is missing, consult your dealer immediately.
! From AM/FM antenna
See page 4.
Ÿ From the digital input of digital audio
component
See page 4.
~ From the video input of TV/monitor
See page 4.
CA-DXJ10 and CA-DXJ20 do not have
component jacks.
From the subwoofers (CA-DXJ30 only)
See page 5.
From the speakers
See page 5.
CA-DXJ20 has 3 speaker terminals.
¤ Voltage selector
(not applicable for Australian models)
Before plugging in, confirm the position the
voltage selector points at. See page 5.
# To a wall outlet
Plug the AC power cord only after all
connections are complete.
If the wall outlet does not match the AC plug,
use the supplied AC plug adapter (not
supplied for Australian and the Middle East
models).
@ From the analog audio output of auxiliary
equipment (VCR, etc.)
See page 4.
The illustration above is CA-DXJ30.
DX-J10_20_30[U].book Page 3 Friday,February 2, 2007 11:25 PM