13
Daily Operations
—Sound & Other Adjustments
Adjusting the Speaker Output Level
You can adjust the speaker output level from –6 (dB) to
+6 (dB). Initial setting: +4 (dB).
• You can also use the setup menu to adjust the speaker
output level (see page 38).
• The function is not available when the surround mode is set
to “STEREO” or Mic Mixing is activated.
1
Select the speaker you want to adjust.
2
Adjust the output level while the display is showing
speaker name.
3
Repeat steps
1
and
2
to adjust other speakers.
Reinforcing the Bass Sound
You can adjust the Active Bass level from level 1
(minimum) to level 4 (maximum).
Initial setting: 4
• This function is not available when VARIO BASS is set to
“OFF” or headphones are plugged in.
ACTIVE BASS
EX. +,–
SOUND MODE
VARIO BASS
Main unit
Remote Control
ACTIVE BASS
EXT LEVEL
+, –
CLOCK/TIMER
CH. LEVEL,
SOUND MODE
DVD LEVEL,
VARIO BASS
SURR MODE
SHIFT
CANCEL
DIMMER
VFP
ENTER/SET
,, ,,
DISPLAY
Remote
ONLY
INFO
FRONT L FRONT R
SURR R
SURR L
CENTER
(Front left
speaker)
(Front right
speaker)
(Center speaker)
(Surround right
speaker)
(Surround left
speaker)
(while holding...)
INFO
DX-J35[U].book Page 13 Friday, April 27, 2007 2:45 PM