JVC CA-MXKA6 Stereo System User Manual


 
18
Using the CD Player
Random Play
The tracks of all the CDs will play in no special order when you
use this mode.
To use Repeat Play for Random Play, press the REPEAT but-
ton to select REPEAT ALL or REPEAT 1 before starting
playback. For details, see Repeating Tracksmentioned below.
1
In Stop mode, set the CD Player in Random
Play mode.
On the Unit
Press the RANDOM button to light the RNDM indicator.
At the same time, RANDOM appears on the display.
On the Remote Control
Press the PROGRAM/RANDOM button until the RANDOM
appears on the display.
The RNDM indicator also lights up on the display.
Each time you press the button, the display changes as follows:
PROGRAM = RANDOM = Normal display (Normal Play) =
(back to the beginning)
2
Press the CD
6
button.
The tracks on all the CDs are played in random order.
To stop playing
, press the 7 button.
To skip a track during playback
, press the ¢ button to
jump to the next track in the random sequence.
To exit Random Play mode
, while the CD Player is stopped,
press the RANDOM button on the Unit or the PROGRAM/RAN-
DOM button on the Remote Control again to light off the RN-
DM indicator. Normal Play resumes.
Repeating Tracks
You can repeat all tracks or individual track, as many times as you
like.
Press the REPEAT button.
The Repeat indicator changes with each press of the button, as fol-
lows:
REPEAT ALL= REPEAT 1DISC= REPEAT 1 = Blank dis-
play = (back to the beginning)
To stop playing
, press the 7 button. Changing the source to the
other (e.g. Tuner) will also stop playing.
To exit Repeat mode
, press the REPEAT button until the Re-
peat indicator on the display goes out.
Repeat mode remains in effect during the following Play Mode
changing:
Tray Lock Function
In order to safely keep the CD in the CD Player, the tray can be
electronically locked.
When the electronic lock is on, the tray cannot be opened even if
the CD Open/Close 0 button on the Unit is pressed.
Locking the Tray
1
Turn on the System and enter CD mode.
2
While pressing down the
7
button, press the
CD Open/Close
0
button on the Unit.
LOCKED appears on the display.
If you try to open the tray by pressing the 0 button,
LOCKED appears on the display to let you know that the tray
has been locked.
Unlocking the Tray
Repeat above steps 1 and 2.
UNLOCKED appears on the display.
Now, you can use the tray normally.
Even after the system is unplugged, the tray lock condi-
tion will be retained for a few days. To unlock the tray after
powering up, you need to perform the unlocking opera-
tion.
REPEAT ALL:
In Normal Play mode, repeats all the tracks on
all the CDs.
In Program Play mode, repeats all the tracks in
the program.
In Random Play mode, repeats all the tracks on
all the CDs in random order.
REPEAT 1DISC:
Repeats all tracks on one CD. (Selectable in
Normal Play only)
REPEAT 1:
Repeats one track.
a. PROGRAM PLAY MODEÔNORMAL PLAY MODE
b. RANDOM PLAY MODE ÔNORMAL PLAY MODE
c. PROGRAM PLAY MODEÔRANDOM PLAY MODE
CA_MXKA6.book Page 18 Friday, February 7, 2003 7:56 PM