JVC CA-MXJ206 Stereo System User Manual


 
– 23 –
English
STANDBY
POWER
CLOCK/TIMER
CANCEL
DEMO
SET
SET
6
When selecting “– CD – – –”
1) Press 4 or ¢ to select the disc
number, then press SET.
2) Press 4 or ¢ to set the track
number, then press SET.
The unit enters volume setting mode.
When selecting “TUNER FM” or
“TUNER AM”
Press 4 or ¢ to select the preset station
number, then press SET.
The unit enters volume setting mode.
7
Press 4 or ¢ to set the volume
level.
You can select the volume level from
among four levels. If you select “ VOL – –
–,” the volume is set to the last level when
the unit has been turned off.
8
Press SET to complete the Daily
Timer setting.
The DAILY indicator stops flashing and remains
lit. The settings you have done are shown on the display
in sequence.
9
Press POWER to turn off the unit
(on standby) if you have set the Daily
Timer with the unit turned on.
To turn on or off Daily Timer after its setting is done
1 Press CLOCK/TIMER repeatedly until
“DAILY” appears on the display.
2 To turn off the Daily Timer, press
CANCEL.
The DAILY indicator goes off and “OFF”
appears on the display.
The Daily Timer is canceled, but the setting for
the Daily Timer remains in memory.
To turn on the Daily Timer, press SET.
The DAILY indicator lights up on the display.
The settings you have done are shown on the
display in sequence for your confirmation.
If the unit is turned on when the timer-on time comes
Daily Timer does not work.
PRESET
+
SET
PRESET +
DAILY
ST
RECSOUND MODE
BASS
TIMER
2
On the remote control:
1
Press SHIFT.
2
Press TIMER.
The DAILY indicator also starts flashing on the display.
Each time you press the button, the timer setting mode
changes as follows:
DAILY = ON TIME = REC = ON TIME =
Clock setting
(See page 11.) = Canceled
3
Press TIMER again.
“ON TIME” appears for 2 seconds, then the
unit enters on-time setting mode.
DAILY
ST
RECSOUND MODE
BASS
DAILY
ST
RECSOUND MODE
BASS
DAILY
ST
RECSOUND MODE
BASS
SHIFT
4
Set the on-time you want the unit
to turn on.
1) Press SELECT – or SELECT + to set the
hour, then press SET.
2) Press SELECT – or SELECT + to set
the minute, then press SET.
“OFF TIME” appears for 2 seconds, then
the unit enters off-time setting mode.
5
Set the off-time you want the unit to
turn off (on standby).
1) Press SELECT – or SELECT + to set the
hour, then press SET.
2) Press SELECT – or SELECT + to set the
minute, then press SET.
The unit enters source selecting mode.
– SELECT +
4
5
SET
8
DAILY
ST
RECSOUND MODE
BASS
– SELECT +
4
5
SET
8
TIMER
2
MX-J300/206/200[C] 20-28 EN 00.4.10, 2:11 PM23