Filter
Top Products
23
Recording a Tape on Deck B
On the unit ONLY:
1
Press 0 for deck B.
2
Put a recordable cassette in, with the exposed
part of the tape down and the side you want
to record facing front.
3
Close the cassette holder gently.
4
Start playing the source—FM, AM (MW),
CD player or auxiliary equipment connected
to AUX IN jack.
• For duplicating tapes, see “Dubbing Tapes” on page 24.
• For recording from CD, see “CD Synchronized
Recording” on page 24.
5
Press REC START/STOP.
The REC (recording) indicator lights up on
the display and recording starts.
• The REC (recording) lamp also lights up
during recording.
To stop during recording, press REC START/STOP again
or 7.
To remove the cassette, press 0 for deck B.
Recording
IMPORTANT:
• It should be noted that it may be unlawful to re-record
pre-recorded tapes, records, or discs without the
consent of the owner of copyright in the sound or video
recording, broadcast or cable program and in any
literary, dramatic, musical, or artistic embodied
therein.
• The recording level is automatically set correctly, so it is
not affected by the VOLUME, the SUBWOOFER LEVEL,
the RHYTHM AX, and the SOUND MODE controls. Thus,
during recording you can adjust the sound you are actually
listening to without affecting the recording level.
• If recordings you have made have excessive noise or static,
the unit may be too close to a TV. Place the unit away from
the TV.
• You can use type I tape for recording.
To protect your recording
Cassettes have two small tabs on
the back to protect unexpected
erasure or re-recording.
To protect your recording,
remove these tabs.
To re-record on a protected tape,
cover the holes with adhesive
tape.
To keep the best recording and playback sound quality
If the heads, capstans, and pinch rollers of the cassette decks
become dirty, the following will occur:
• Impaired sound quality
• Discontinuous sound
• Fading
• Incomplete erasure
• Difficulty in recording
To clean the head, capstan, and pinch roller
Use a cotton swab moistened with alcohol.
To demagnetize the head
Turn off the unit, and use a head demagnetizer (available at
electronics and audio shops).
Head
Capstan
Pinch roller
Erase head
MXGB6&5[B]_23-32.p65 04.1.21, 5:33 PM23