Filter
Top Products
14
Switching Temporarily to a Program Type of
Your Choice
The Enhanced Other Networks function allows the unit to
switch temporarily to a broadcast program of your choice
(NEWS or INFO) from a different station.
To activate the Enhanced Other Networks function
Enhanced Other Networks function is applicable only to
preset FM RDS stations. If not yet done, see “Presetting
Stations” on page 12.
• There is a time limit in doing the following steps. If the
setting is canceled before you finish, start from step
1
again.
On the remote control ONLY:
1
Press and hold RDS MODE for
more than 1 second.
“E. SELECT” appears on the display.
2
Press SELECT + or SELECT –
to select the data type.
• Each time you press the button, the data
type of the Enhanced Other Networks
changes as follows:
NEWS:News
INFO: Program the purpose of which is to impart
advice in the widest sense.
E. OFF: The function is canceled.
The data type indicator (NEWS or INFO) you have
selected also lights up on the display.
Now, the function is activated. See “How the Enhanced
Other Networks function actually works.”
To cancel the function, repeat from step
1
and select “E.
OFF” in step
2
.
The data type indicator (NEWS or INFO) goes off.
How the Enhanced Other Networks function actually works:
CASE 1
If there is no station broadcasting the program you
have selected
The unit continues tuning in to the current station.
«
When a station starts broadcasting the program you have
selected, the unit automatically switches to the station. The
selected data type indicator starts flashing on the display.
«
When the program is over, the unit goes back to the
previously tuned station, but the Enhanced Other Networks
function still remains activated.
CASE 2
If there is a station broadcasting the program you have
selected
The unit tunes in to the program. The selected data type
indicator starts flashing.
«
When the program is over, the unit goes back to the
previously tuned station, but the Enhanced Other Networks
function still remains activated.
CASE 3
If the FM station you are listening to is broadcasting
the program you have selected
The unit continues to receive the station but the selected
data type indicator starts flashing.
«
When the program is over, the indicator stops flashing, but
the Enhanced Other Networks function still remains
activated.
More about the Enhanced Other Networks function
• Enhanced Other Networks data sent from some stations may not
be compatible with this unit. In this case, the Enhanced Other
Networks function may not work correctly.
• While listening to a program tuned in by this function, the station
does not change even if another network station starts
broadcasting a program of the same Enhanced Other Networks
data.
• If the stations alternate intermittently between the station tuned by
this function and the currently tuned station, cancel this function
by following the procedure in the left column.
• The Enhanced Other Networks function is canceled when you
change the source to CD, TAPE or AUX.
• The Enhanced Other Networks function is temporarily canceled
when you change the band to AM (MW).
E. OFF
NEWS INFO
MXGB6&5[B]_13-14.p65 04.1.21, 5:33 PM14