Filter
Top Products
20
Programming the Playing Order of the Tracks
—–Program Play
You can arrange the order in which the tracks play before you
start playing. You can program up to 32 tracks.
• To use Repeat play (see page 21) for Program play, press
REPEAT after starting Program play.
Playback and recording for Program play are not
available to MP3 discs on this unit
There may be a malfunction in case that you try to do such playback
or recording.
If a malfunction occurs, unplug the AC power cord and then plug it
back in.
On the unit ONLY:
1
Load CDs.
• If the current playing source is not the CD player, press
CD 6, then 7 before going to the next step.
2
Press PROGRAM so that
“PROGRAM” appears on the
display.
The PRGM (program) indicator also lights up on the
display.
• All Disc play is selected automatically. You cannot
select One Disc play for Program play.
• If a program has been stored in memory, the program is
called up.
3
Press one of the disc number
buttons (CD1, CD2, and CD3)
to select the disc number you
want to play.
4
Press ¢ or 4 to select
the track number, then
press SET/DISPLAY.
Each time you select a track and
press SET/DISPLAY, the selected
track number is added to the track
number indicator.
• You can select up to the 99th track
on each disc.
Track number
Disc number
Program step number
5
Program other tracks you want.
• To program tracks from the same disc, repeat step
4
.
• To program tracks from a different disc, repeat steps
3
and
4
.
6
Press CD 6.
The tracks are played in the order you have
programmed.
To stop during play, press 7.
To exit from Program play, press PROGRAM again before
or after play so that the unit enters All Disc play. (The
program you have made is stored in memory until you turn
off the unit, eject the carrousel, or erase the program.)
• Program play is also canceled when you press CD 0.
To modify the program
Before playing, you can erase the last
programmed track shown on the display by
pressing CANCEL/DEMO.
• Each time you press the button, the last
programmed track is erased from the program.
To add tracks in the program before play, simply select the
disc numbers and/or track numbers you want to add by
following steps
3
and
4
of the programming procedure.
To check the program before play, perform the following
procedure:
1
Press RANDOM while Program play is stopped.
2
Press ¢ or 4.
The programmed tracks appear on the display in the
programmed (or reverse) order.
• Pressing CD 6 starts Program play from the first track of
the program.
If you want to add tracks in the program after
checking the program
Press PROGRAM twice, then add tracks by following steps
3
and
4
of the programming procedure.
To erase the entire program, press 7 while Program play is
stopped.
• Turning the power off or ejecting the carrousel will also
erase the stored memory.
If you try to add another track when 32 tracks are
already programmed
“FULL” appears on the display and the 32nd track is replaced by the
newly added track.
If you have programmed a track from an empty tray,
or a track number that does not exist on the disc
Such program steps will be skipped.
Continued
ALL
DISC
PRGM
TRACK
WOOFER
PRGM
TRACK
PRGM
TRACK
MXGB6&5[B]_20-22.p65 04.2.3, 7:41 PM20