Filter
Top Products
– 13 –
D.CLUB
(Dance CLUB)
OFF
(Canceled)
HALL STADIUM ROCK
POP
CLASSIC
MANUAL 1MANUAL 2MANUAL 3
The SOUND MODE indicator
also lights up on the display.
Selecting the Sound Modes
You can select one of the 6 preset sound modes. This function
only affects the playback sound, but does not affect your
recording.
To select the sound modes, turn
SOUND MODE until the sound mode
you want appears on the display.
When using the remote control, press
SOUND MODE ∧ or ∨.
• The sound modes change as follows:
D.CLUB*: Increases resonance and bass.
HALL*: Adds depth and brilliance to the sound.
STADIUM*: Adds clarity and spreads the sound, like in an
outdoor stadium.
SEA (Sound Effect Amplifier) modes:
ROCK: Boosts low and high frequency. Good for
acoustic music.
POP: Good for vocal music.
CLASSIC: Good for classical music.
Manual modes:
MANUAL 1/2/3:
Your individual mode stored in memory. See
“Creating Your Own Sound Modes—Manual
Mode” on page 14.
OFF: The sound mode is canceled. The SOUND
MODE indicator goes off.
* Surround elements are added to the SEA element to create a
being-there feeling in your room.
When one of these modes is selected, the SOUND MODE
indicator lights up as —
While one of the SEA modes (including manual modes) without
surround elements is selected, the SOUND MODE indicator
lights up as —
Reinforcing the Bass Sound
You can select one of the 4 subwoofer levels. This function
only affects the playback sound, but does not affect your
recording. The subwoofer level can be adjusted in 4 steps—
LEVEL 1, LEVEL 2, LEVEL 3, and LEVEL 4 (MAX
LEVEL).
Turn SUBWOOFER LEVEL + / –
clockwise (+) to increase the subwoofer
level or counterclockwise (–) to decrease
it.
When using the remote control, press
LEVEL SELECT until “LEVEL” appears.
• Press LEVEL + to increase the subwoofer level.
• Press LEVEL – to decrease the subwoofer level.
SUBWOOFER indicator flashes
when adjusting subwoofer level.
EN11-15.CA-MXDVB10,B9,A9_f 02.4.24, 9:42 AM13