JVC CA-EX70 Stereo System User Manual


 
36 CA-EX70
When CD is selected:
1Press +/R or –/L repeatedly to select desired disc
number, then press SET.
2Press +/R or –/L repeatedly to select desired track
number, then press SET.
You can select any track number from 1 to 20.
Pressing SET without selecting the disc and track
numbers starts playback from the first track of the last
disc selected before timer operation.
6 Set the volume.
Press +/R or –/L repeatedly to set the volume, then
press SET.
The volume can be set between 0 and 50.
After SET is pressed, the display shows the start time,
the end time, the source, and the volume settings.
If the power is ON, press POWER to enter the
STANDBY mode once your settings are complete.
Timer operation
Once set, the DAILY timer operates every day, at the same
time, unless the DAILY timer is canceled.
When the end time (OFF) arrives, the unit automatically
switches to the STANDBY mode.
Switching the DAILY timer OFF and ON
The DAILY timer settings are stored in memory.
To turn off the timer without changing the settings, switch
the timer operation OFF. The next time you want to use the
timer, switch it back ON (the previous settings are still
available).
Switching OFF
Press CLOCK/TIMER, so that “DAILY” blinks in the display
(as described in step 1 of the main operations), then press
CANCEL. The DAILY indicator turns off and “OFF” appears
in the display.
Switching ON
Press CLOCK/TIMER, so that “DAILY” blinks in the display
(as described in step 1 of the main operations), then press
SET. The DAILY indicator lights up and the start time, the
end time, the source, and the volume settings appear in the
display.
Blinks
After setting the volume (before pressing SET)
/L
+
/R
SET
CLOCK
/TIMER
CANCEL
EN27-39.CA-EX70[J]/1 98.6.8, 9:58 AM36