JVC CA-MXG780V Stereo System User Manual


 
– 8 –
English
For CA-MXG780V/G750V/GA7V
1 Open the speaker terminals on the rear of the
unit.
2 Insert the end of the speaker cord into the
terminal.
Match the polarity (colours) of the speaker terminals: Red
(+) to red (+) and black (–) to black (–).
3 Close the speaker terminals.
IMPORTANT: Use only speakers with the same speaker
impedance as indicated by the speaker terminals on the
rear of the unit.
DO NOT connect more than one speaker to each
speaker terminal.
DO NOT push or pull the speakers as this will
damage the foot spacers at the bottom of the
speakers.
1
3
Black
Red
Speaker cords
(red/black)
Right
speaker
Left
speaker
Speaker cords
(red/black)
2
Surround Speakers
Connect the right rear speaker to the RIGHT jack.
Connect the left rear speaker to the LEFT jack.
To connect surround speakers.
Red
EN01-13.CA-MXGA9V/8V/7V 7/4/03, 3:29 PM8