Filter
Top Products
39
AUDIO menu
Item
Contents
DIGITAL AUDIO OUTPUT
Set this item correctly when using the OPTICAL DIGITAL OUTPUT terminal on the rear.
PCM ONLY:
When connecting to audio equipment which is compatible with only linear PCM
signals.
DOLBY DIGITAL/PCM:
When connecting to a Dolby Digital decoder or an amplifier with
built-in Dolby Digital decoder.
STREAM/PCM:
When connecting to a DTS/MPEG Audio decoder or an amplifier with built-in DTS/
MPEG Audio decoder.
D. RANGE COMPRESSION
You can enjoy a powerful sound at a low volume level while playing Dolby Digital software.
AUTO:
Select to apply the compression only to multi-channel encoded audio (except for 1-channel
and 2-channel sources).
ON:
Select this to always apply the compression.
SPK. SETTING menu
Item
Contents
LEVEL
Select this item, then press ENTER/SET to show the LEVEL submenu for adjusting the speaker output
level.
FRONT LEFT/RIGHT SPEAKER, CENTER SPEAKER, SURROUND RIGHT/LEFT
SPEAKER:
Select the speaker, then adjust the output level (–6 dB to +6 dB in 1 dB steps).
TEST TONE:
Turns on/off the test tone.
• Select “ALL CH ST,” “MUSIC,” or “MOVIE” (see page 15) to adjust the output level for all
speakers with the test tone.
DELAY
Select this item, then press ENTER/SET to show the DELAY submenu for adjusting the speaker delay
time.
FRONT LEFT/RIGHT SPEAKER, CENTER SPEAKER, SURROUND RIGHT/LEFT
SPEAKER:
Select the speaker, then adjust the delay time (0 ms to 15 ms in 1 ms steps).
• Set one speaker to “0 ms,” then set other speakers so that the sound from all speakers can reach you
at the same time.
LEVEL
0dB
CENTER SPEAKER
0dB
SURROUND RIGHT SPEAKER
0dB
FRONT LEFT SPEAKER
0dB
FRONT RIGHT SPEAKER
OFF
TEST TONE
SURROUND LEFT SPEAKER
0dB
DELAY
0 ms
CENTER SPEAKER
0 ms
SURROUND RIGHT SPEAKER
0 ms
FRONT LEFT SPEAKER
0 ms
FRONT RIGHT SPEAKER
SURROUND LEFT SPEAKER
0 ms
OTHERS menu
Item Contents
RESUME
You can select Resume.
ON:
The System resumes playback from the position where playback has been stopped (not applicable
for CD).
OFF:
Resume is deactivated.
ON SCREEN GUIDE
Activate or deactivate the on-screen guide.
ON:
Activate the on-screen guide.
OFF:
Deactivate the on-screen guide.
DivX REGISTRATION
The System has its own Registration Code.
If necessary, you can confirm it.
Once you have played back a DivX file in which the Registration Code is recorded, the System’s
Registration Code is overwritten for copyright protection.
DX-U10_8[U].book Page 39 Monday, March 26, 2007 2:24 PM