ION DSP-AX750SE Stereo Receiver User Manual


 
CONTROLS AND FUNCTIONS
7
English
INTRODUCTION
F MULTI CH IN
Selects MULTI CH INPUT when using an external
decoder (etc.).
G SELECT k/n
Selects another component that you can control
independently of the input component selected with the
input selector buttons.
H AMP
Selects the AMP mode. You must select the AMP mode to
control the main unit.
I VOL –/+
Increases or decreases the volume level.
J MUTE
Mutes the sound. Press again to restore the audio output to
the previous volume level.
K SET MENU (A/B/C/D/E)
Activates the SET MENU function.
[ RX-V750 ] Selects preset station groups when the unit is
in tuner mode.
L ON SCREEN
Selects the display mode of the on-screen display (OSD)
this unit sends to your video monitor.
M STRAIGHT (EFFECT)
Switches the sound fields off or on. When STRAIGHT is
selected, input signals (2-channel or multi-channel) are
output directly from their respective speakers without
effect processing.
N EX/ES
Switches between 5.1 or 6.1/7.1-channel playback of
multi-channel software.
O NIGHT
Turns on or off the night listening modes (see page 36).
P PURE DIRECT
Turns on or off PURE DIRECT mode (see page 36).
RX-V750 Europe model only
Q RDS tuning buttons
FREQ/RDS
Press this button when the unit is receiving an RDS station
to cycle the display between the PS mode, PTY mode, RT
mode, CT mode (if the station offers those RDS data
services) and/or the frequency display.
EON
Press this button to select a radio program type (NEWS,
INFO, AFFAIRS, SPORT) to tune in automatically.
PTY SEEK MODE
Press this button to set the unit to the PTY SEEK mode.
PTY SEEK START
Press this button to begin searching for a station after the
desired program type has been selected in the PTY SEEK
mode.
01EN_00_RXV750_GB.book Page 7 Friday, March 5, 2004 11:40 AM