Filter
Top Products
34
PLAYBACK
■ Remote control operation
Press AMP to select the AMP mode, then press
one of the sound field program buttons
repeatedly to select the desired program.
The name of the selected program appears in the front
panel display.
y
Choose a sound field program based on your listening preference,
and not on the name of the program.
• When you select an input source, this unit automatically selects
the last sound field program used with that source.
• Sound field programs cannot be selected when MULTI CH
INPUT is selected.
• Sampling frequencies higher than 48 kHz (except for DTS 96/
24 signals) will be sampled down to 48 kHz, then sound field
programs will be applied.
■ Enjoying multi-channel software
If you connected a surround back speaker, use this feature
to enjoy 6.1/7.1-channel playback for multi-channel
sources using the Dolby Pro Logic IIx, Dolby Digital
Surround EX or DTS-ES decoders.
Press AMP to select the AMP mode, then press
EX/ES on the remote control to switch between
5.1 and 6.1/7.1-channel playback.
To select a decoder, press j / i repeatedly when
PLIIxMusic (etc.) is displayed.
AUTO (AUTO)
When a signal (flag) that can be recognized by the unit is
input, the unit selects the optimum decoder for playing
back the signal in 6.1/7.1 channels.
If the unit cannot recognize the flag or no flag is present in
the input signal, it cannot automatically be played in 6.1/
7.1 channels.
Decoders (select with j / i)
You can select from the following decoders depending on
the format of the software you are playing.
PLIIxMovie
For playing back Dolby Digital or DTS signals in 6.1/7.1
channels using the Pro Logic IIx movie decoder.
PLIIxMusic
For playing back Dolby Digital or DTS signals in 6.1/7.1
channels using the Pro Logic IIx music decoder.
EX/ES
For playing back Dolby Digital signals in 6.1/7.1 channels
using the Dolby Digital Surround EX decoder.
DTS signals are played back in 6.1/7.1 channels using the
DTS-ES decoder.
EX
For playing back Dolby Digital or DTS signals in 6.1/7.1
channels using the Dolby Digital Surround EX decoder.
OFF (OFF)
Decoders are not used to create 6.1/7.1 channels.
y
When “SURR B L/R SP” is set to SMLx1 or LRGx1 (see
page 58), the surround back channel will be output from the left
SURROUND BACK speaker terminals.
Notes
TRANSMIT
RE-NAME
INPUT MODE
STANDBY
SYSTEM
POWER
AB
PHONO
CDMD/CD-RTUNERV-A UX
DVD
AMP
POWERPOWER
REC
AUDIO
AVTV
SELECT
VCR 1DTV/CBL DVR/VCR2
MULTI CH IN
SLEEP
CLEAR LEARN
MUTE
MENUTITLE
CH CH
SET MENU
LEVEL
A/B/C/D/E
TV INPUT
TV VOL
PRESET
TEST
ON SCREEN
STRAIGHT
ROCKJAZZHALLSTEREO
4321
8
10
7
09
65
ENTER
MOVIETV THTRMUSIC ENTERTAIN
EX/ES
NIGHTq/DTS
PURE DIRECT
EFFECT
CHP/INDEX
DISPLAYRETURN
PRESET
TV MUTE
SELECT
TV VOL
Sound field
program
buttons
AMP
PHONOCDTUNER
MD/CD-R
DVD
HiFi DSP
DTV/CBL
V-AUXVCR1
DVR/VCR2
96
24
q
PL
q
EX
MATRIX DISCRETE
SILENT CINEMA NIGHT
ZONE2
PTY HOLD AUTO
PS RT CT EONPTY
TUNED STEREO MUTE
VOLUME
MEMORY
SLEEP
VIRTUAL
PCM
q
PL
q
PL x
A B
SP
ft
mS
dB
dB
96/24
LFE
L C R
SL SB SR
q
DIGITAL
t
01DJAZZACLUBO00
ROCKJAZZHALLSTEREO
4321
8
10
7
09
65
ENTER
MOVIETV THTRMUSIC ENTERTAIN
EX/ES
NIGHT
q
/DTS
PURE DIRECT
CHP/INDEX
AMP
Program name
ENTER
EX/ES
CHP/INDEX
TV VOL
PRESET PRESET
TV MUTE
TV VOL
SELECT
CHCH
+
+
–
–
01EN_00_RXV750_GB.book Page 34 Friday, March 5, 2004 11:40 AM