ION DSP-AX750SE Stereo Receiver User Manual


  Open as PDF
of 91
 
61
English
SET MENU
ADVANCED
OPERATION
Dialog lift DIALG.LIFT
Use to turn on and off the DIALG.LIFT parameter (see
page 78). This parameter adjusts the height of the front
and center channel sounds (dialog, vocals, etc.) by
assigning some of the front and center channel elements to
the presence speakers.
Choices: OFF, ON
• Select OFF to turn off DIALG.LIFT effect.
• Select ON to turn on DIALG.LIFT effect.
“DIALG.LIFT” appears only when “PRESENCE SP” is set to
YES (see page 58).
■ Presence/surround back channel select
H)PR/SB SELECT
You can select to prioritize either the surround back or
presence speakers when playing sources that contain
surround back channel signals using CINEMA DSP sound
field programs.
Choices: PRch, SBch
• Select PRch to use presence speakers even when
surround back channel signals are input. The signals
for the surround back channel will be output from
surround speakers.
• Select SBch to use surround back speakers when a
surround back channel signal is detected in a CINEMA
DSP program. Presence channel signals will be output
from front speakers.
Use to reassign digital input/outputs, select the input mode
or rename your inputs.
■ Input/output assignment A)I/O
ASSIGNMENT
You can assign jacks according to the component to be
used if this unit’s initial settings do not correspond to your
needs. Change the following parameters to reassign the
respective jacks and effectively connect more components.
Once the inputs have been reassigned, you can select the
corresponding component by using INPUT on the front
panel or the input selector buttons on the remote control.
For COMPONENT VIDEO jacks A and B
Choices: DVD, V-AUX, DTV/CBL, VCR 1, DVR/VCR2
For OPTICAL OUTPUT jack 1
Choices: MD/CD-R, TUNER (DSP-AX750SE), CD,
V-AUX, DTV/CBL, VCR 1, DVD, PHONO, DVR/VCR2
For OPTICAL INPUT jacks 2, 3 and 4
Choices: CD, DTV/CBL, VCR 1, DVD, PHONO,
DVR/VCR2, MD/CD-R, TUNER (DSP-AX750SE)
Note
PRch)SBch
[]/[]:Select
[SELECT]:Return
p
p

H)PR/SB
SELECT
2 INPUT MENU
.A)I/OASSIGNMENT
B)INPUTMODE
C)INPUTRENAME
[]/[]:Up/Down
[SELECT]:Enter

2
INPUT
MENU
p
p
.[A];;;;;DVD
(DVD)
[B];;;;;DTV/CBL
(DTV/CBL)

CMPNT-V
INPUT
.(1);;;;;MD/CD-R
(MD/CD-R )

OPTICAL
OUT
.(2);;;;;MD/CD-R
(MD/CD-R)
(3);;;;; DVD
(DVD )
(4);;;;;DTV/CBL
(DTV/CBL )

OPTICAL
IN
01EN_00_RXV750_GB.book Page 61 Friday, March 5, 2004 11:40 AM
 previous next