Filter
Top Products
7
Insignia NS-STR514 Stereo Receiver with Bluetooth
www.insigniaproducts.com
Connecting speakers
1 Strip away approximately 3/8” (10 mm) of
insulation from each speaker wire and tightly
twist the end together.
2 Loosen each speaker terminal on the back of the
stereo receiver by turning it counterclockwise.
3 Insert the bare wire into the terminal, then
tighten the terminal cap to securely connect it.
Make sure that none of the wire insulation is
under the terminal.
4 Make sure cables are secure by lightly pulling on
them.
Connect speakers by matching the channel (left
and right) and polarity (+ and -). If the
connections are not correct, you will not hear
any sounds from the speakers.
If the sound is unnatural and lacks bass, the
speaker polarity is incorrect.
Connecting audio-only devices
Connecting devices with video
1 Connect the cable from the L/R AUDIO OUT
jacks on the audio device to the L/R AUX IN (1 or
2) jacks on the receiver.
Caution
• We recommend that you use speakers with an
impedance of 8 Ohms or more.
• Do not let the bare speaker wires touch each
other or any metal part of this receiver. Doing so
may damage the receiver or speaker.
• Do not touch the speaker wire terminals while
the AC power cord is plugged in. Doing so could
result in an electric shock.
Note
If you have only one pair of speakers, connect them
to the SPEAKER A terminals.
Speaker A
Speaker B
Left
Left
Right
Right
Back panel
Back panel
CD player
TV
MP3 player,
smartphone, etc.
3.5 mm audio cable
(not included)
Front panel
NS-STR514_14-0118_MAN_V1_ENG.book Page 7 Thursday, March 6, 2014 10:53 AM