Filter
Top Products
13
Insignia NS-STR514 Stereo Receiver with Bluetooth
www.insigniaproducts.com
Recording an audio source
1 Select the recording input source by pressing
the appropriate button on the remote control.
2 Start recording on the AUX 1 or AUX 2 device,
as appropriate.
3 Start playback on your input device to provide
the audio signal to record.
Using the sleep timer
The sleep timer automatically turns the receiver off
after a specified period of time.
• Press the SLEEP button on the remote control to
specify the amount of time you want the receiver
to play.
Each time this button is pressed, the time
changes as follows:
• 10 minutes>20 minutes>30 minutes>60
minutes>90 minutes>OFF
Adjusting the display brightness
• Press the DIMMER button to set the brightness of
the display.
Each time this button is pressed, the brightness
changes as follows:
• ON>Dimmer>OFF
Using a Bluetooth device
You can enjoy music wirelessly, through your
receiver, from Bluetooth audio devices such as an
MP3 player or a mobile phone.
Connecting to a Bluetooth device
1 Select BT AUDIO as the input source by
pressing:
•The BLUETOOTH button on the remote
control.
-OR-
•The INPUT button on the receiver repeatedly
until BT AUDIO is shown on the display.
PAIRING will be shown on the display and the
Bluetooth indicator will blink.
2 Navigate to your device's Bluetooth settings,
turn on Bluetooth, then search for available
devices. PAIRING will be shown on the display
and the Bluetooth indicator will blink.
a. For iPad/iPhone/iPod touch:
i. From the home page, touch
Settings > General > Bluetooth.
b. For Android Phone/Tablet:
i. From your smart phone/tablet home
page, touch Settings >Wireless and
networks.
ii. Touch to activate Bluetooth, then
touch Bluetooth settings.
c. For a PC or Mac, you can find these
instructions in the documentation that
came with your computer or operating
system.
3 On your Bluetooth device, select “NS-STR514”
from the device list. Repeat step 2 if
“NS-STR514” is not displayed.
4 If a PIN code is requested, enter “0000.”
Note
While operating the sleep timer, the lights up on
the display.
Note
If the display is off, pressing any button turns the
display on.
Note
Place the device within 30 ft. (10 m) of your receiver.
OR
NS-STR514_14-0118_MAN_V1_ENG.book Page 13 Thursday, March 6, 2014 10:53 AM