Filter
Top Products
7
Insignia NS-R2001 AM/FM Stereo Receiver
www.insigniaproducts.com
Connecting a turntable
Connecting speakers
To connect your speakers:
1 Turn the terminal cap to loosen it.
2 Insert the bare wire into the terminal fully and
tighten the terminal cap to securely connect it.
Make sure that you strip the wire adequately so
that none of the wire insulation is under the
terminal.
3 Make sure it is fastened firmly by pulling the
cable lightly.
Be sure to connect the speakers correctly,
according to the channel (left and right) and the
polarity (+ and -). If you do not make the
connections correctly, you will not hear any
sounds from the speakers.
If the sound is unnatural and lacks bass, the
speaker polarity is incorrect.
Connecting headphones
To connect your headphones:
1 Insert a 1/4” headphone plug into the
headphone jack on the receiver.
2 Press the SPEAKER A or SPEAKER B button on
the remote to turn the corresponding speakers
off. The corresponding speaker indicator turns
off, H appears on the display, and sound is heard
from the headphones.
Connecting the power
To connect your receiver to power:
• Plug the power cord into an AC outlet.
Note
To connect a turntable with an MC type cartridge, use
a separate head amplifier or step-up transformer.
Caution
We recommend that you use speakers with an
impedance of 8 Ohms or more if using only the
SPEAKER A or SPEAKER B terminals. Use speakers
with an impedance over 16 Ohms or more if using
both the SPEAKER A or SPEAKER B terminals.
Do not let the bare speaker wires touch each other or
any metal part of this receiver. Doing so may damage
the receiver or speaker.
Turntable with MM-type
cartridge
Speaker A
Speaker B
Left
Left
Right
Right
Notes
If you have only one pair of speakers, connect them
to the SPEAKER A terminals.