Filter
Top Products
12
Insignia NS-R2001 AM/FM Stereo Receiver
www.insigniaproducts.com
2 To stop automatically presetting stations, press
MEMO/MEMORY again.
To manually preset a radio station:
1 Press TUNE/PRESET until PRESET is not
displayed.
2 Tune to the station.
3 Press the MEMO button on the remote or the
MEMORY button on the receiver. MEM blinks
for five seconds.
4 Select a preset number between 1 and 30 by
turning the UP/DOWN knob, or by pressing the
PRESET / buttons, then pressing the
MEMO button again.
- OR -
Enter a preset number between 1 and 30 by
using the number keys.
5 Repeat this procedure to memorize additional
stations.
Tuning to preset stations
To tune to a preset station:
1 Select the tuner as the input source.
2 Press TUNE/PRESET to select the preset mode.
PRESET lights up.
3 Rotate the UP/DOWN knob or press the PRESET
/ buttons on the remote control.
-OR-
Enter the preset number using the numeric
keypad.
Notes
• Weak FM stations cannot be memorized
• You can manually preset AM stations or weak
stations.
Notes
• When using the numeric keypad on the remote
control, if your number is greater than nine,
enter the first digit, then enter the second digit
within two seconds.
• When using the numeric keypad, the station is
stored automatically without pressing the
MEMO button.
• A stored frequency is erased from memory by
storing another frequency in its place.
• If MEM goes off, start again from step 3.
OR
Note
When using the numeric keypad on the remote
control, if your number is greater than nine, enter the
first digit, then enter the second digit within two
seconds.
OR