Filter
Top Products
6
Insignia NS-R2001 AM/FM Stereo Receiver
www.insigniaproducts.com
Connecting the antennas
To connect the antennas:
1 Connect the Indoor FM antenna (included) to
the FM jack on the back of the receiver.
2 Move the position of the antenna until you get
the best reception of your favorite FM stations.
3 Remove the AM antenna from it’s package (if
necessary), uncoil the wire, then fold the two
halves of the loop together.
4 Fold the base under the loop and press it onto
the pins on the bottom of the loop.
5 To connect the Indoor AM antenna, press the
GND and AM Loop levers, insert the ends of the
wires, then release the levers. Make sure that
only the bare, stripped wire is inserted in the
jack.
6 Move the position of the antenna until you get
the best reception of your favorite AM stations.
Connecting audio-only devices
Connecting devices with video
To connect devices with video:
1 Connect the cable from the Audio Out jack on
the audio device to the L/R audio jacks on the
receiver.
2 Connect the video cables (component,
composite, HDMI, DVI, S-Video, or RF) from the
output jack on the video device to the
appropriate input jack on your TV.
Note
To improve reception, you may use a 75 Ω
outdoor antenna instead of an indoor antenna.
Disconnect the indoor antenna before replacing it
with an outdoor antenna.
Note
To improve reception, you may use an outdoor AM
antenna instead of a loop AM antenna. Disconnect
the indoor antenna before replacing it with an
outdoor antenna.
Indoor AM antenna
FM antenna
Indoor AM antenna
CD player
REC (LINE) IN
PLAY OUT
PLAY (LINE) OUT
Tape deck
MP3 player
Audio cable with mini-plug (not included)
PLAY (LINE) OUT
TV
REC IN
PLAY OUT
VCR
VIDEO OUT
DVR/DVD/Blu-ray
AUDIO OUT
VIDEO OUT