6
Insignia NS-A3111 DVD Executive Shelf System
www.insignia-products.com
Back panel
Remote control
13 Disc Tray Place a DVD or CD, label side up, into
this tray.
14 USB jack Plug an external USB device into this
jack.
Note
Connect the AC cord only after the speakers, antennas,
and all optional equipment have been connected. Never
make or change any connections with the power switched
on. The rating plan is located on the back of the system.
# Description Function
1 Power cord Plug into an electrical outlet
2 Speakers Connect the left speaker to the L
terminals and right speaker to the R
terminals. Connect the colored wire to
the color terminal and black wire to the
black terminal.
3 Video Output For connecting VCRs or other
recording devices.
Audio Outputs For connecting the audio (L/R) signals
to external recording devices, such as
VCRs.
4 Coaxial output Connect to an external device that has
a digital audio input jack.
5 FM antenna
input
connections
For FM reception connect the FM
antenna to the FM jack. Adjust until the
clearest signal is received.
AM loop
antenna
connections
For AM reception, connect the AM loop
antenna to the AM jack. Adjust until the
clearest signal is received. Insert the
stripped portion of the antenna into the
terminal fully.
Note: Position the antenna as far as
possible from TV, VCR, or other
radiation source.
6 Component and
progressive
video outputs
Connect to a television that has
component video input . Use
component video cables. This type of
connection provides the best picture
quality.
# Description Function
# Button Function
1
(Standby/on)
Press to toggle between Operating and
Standby modes.
2 0 - 9 numeric
keys
In DVD mode, press to enter title,
chapter, track, and time search
selections.
In Radio mode, press to enter a preset
station.
3 TITLE Press to display the title menu, if
present on the disc.
4
(Stop)
Press STOP to stop playback. Playback
begins from this point when you press
PLAY. Press STOP twice, then press
PLAY to begin playback from the
beginning.
5 MENU In DVD mode, press to enter the Disc
Contents menu. In PBC ON mode,
press to view a VCD disc menu.
6
, , ,
(Arrow
keys)
In Menu mode, press to navigate in the
indicated directions for making
selections in menus.
In Radio mode, press or to
change the radio frequency. Press
or to change the radio memory.
DAV8611