Filter
Top Products
9
If you are using a desktop computer and want to see the image on your
computer screen as well as on the projection screen, plug the monitor cable
to the Monitor out connector on the projector.
You can control the projector from an LCD control panel, touch screen, or
other control device or computer by connecting an RS-232 cable to the pro-
jector’s Serial Control connec
tor. Specific RS-232 commands can be found in
the Service and Support section of our website and in the Appendix.
The projector can be managed by networking software through its Net
w
ork
(RJ-45) connector. Detailed instructions on this feature can be found on our
website.
connect monitor cable
connect RS-232 cable
connect CAT-5 cable
Network