HTS-20 Home-Theater System – Owner’s Manual
◆
15
The subwoofer may be connected to your system using the SPEAKER-LEVEL INPUTS
❶
on the
plate located on the rear panel of the subwoofer. Use speaker wire, maintaining proper polarity
(+ to + and – to –). Attach the speaker wire to the left and right SPEAKER-LEVEL INPUTS on
the subwoofer and the other ends to the proper left and right OUTPUTS on your amplifier or
receiver. Then connect the outputs of the subwoofer to the front left and right satellites as shown
in Figure 12. The additional speaker wires required for this connection method are not
included with the system.
Connect your subwoofer to an unswitched AC wall outlet.
Figure 12. Method when connecting
subwoofer to satellites.
AMPLIFIER
OUTPUTS
+
––
+
RIGHTLEFT
SPKR
In
SPKR
Out
+ L –
– R +
L
R
Low-Level In
Volume
Power
Phase
Min Max
L. SATELLITE
Rear View
R. SATELLITE
Rear View
SUBWOOFER
+ –
+ –
On
Crossover
Bypass
Off