Filter
Top Products
Rev 3, March/2007 ©Honeywell International Inc. Do not print without express permission of Honeywell. 1-6
KNI 582
1.6 LICENSE REQUIREMENTS
None.
1.7 CONTINUED AIRWORTHINESS INSTRUCTIONS
1.7.1 Equipment
The instructions for continued airworthiness given in the TC or STC approvals for this
product supplements or supersedes the instructions for continued airworthiness in this
manual.
Most Honeywell products are designed and manufactured to allow "on condition
maintenance". On condition maintenance is described as follows; There are no periodic
service requirements necessary to maintain continued airworthiness. No maintenance is
required until the equipment does not properly perform its intended function. When
service is required, a complete performance test should be accomplished following any
repair action. Consult the appropriate unit Maintenance/Overhaul Manual for complete
performance test information.
14 CFR Part 25.1529 Instructions for Continued Airworthiness is met per the following
instructions:
A. The removal of the equipment is on the condition of failure. There is no re-
quired maintenance.
1.7.2 Wires/Coax Cables
During on-condition or regularly scheduled maintenance, inspect wires and coax cables
following the guidelines listed in AC 43.13-1B Chapter 11, 12 as necessary.