Filter
Top Products
2 TABLE OF CONTENTS
3 Introduction
4 Safety Information
4 Unpacking
5 Front Panel Controls
7 Rear Panel Connections
9 Main Remote Control Functions
12 Zone II Remote Control Functions
13 Installation and Connections
13 Audio Connections
13 Video Connections
14 SCART A/V Connections
16 System and Power Connections
17 Speaker Selection
17 Speaker Placement
18 System Configuration
18 First Turn On
18 Using the On-Screen Display
18 System Setup
19 Input Setup
19 Speaker Setup
22 Surround Setup
23 Configuring the Surround Off
(Stereo) Modes
23 Delay Settings
24 Night Mode Settings
24 Output Level Adjustment
24 Using EzSet
25 Manual Output Level Adjustment
27 Operation
27 Surround Mode Chart
29 Basic Operation
29 Source Selection
29 6/8-Channel Direct Input
30 Controls and Use of Headphones
30 Surround Mode Selection
31 Digital Audio Playback
31 Dolby Digital
31 DTS
31 PCM Audio Playback
31 Selecting a Digital Source
32 Digital Bitstream Indicators
32 Surround mode Types
32 PCM Playback Indications
32 Speaker/Channel Indicators
33 Night Mode
33 Tape Recording
33 Output Level Adjustment
With Source Signals
34 Memory backup
35 Advanced Features
35 Surround Amplifier Channel Assignment
35 Display Brightness
35 Turn-On Volume Level
36 Semi-OSD Settings
36 Full-OSD Time Out Adjustment
36 Multiroom Operation
36 Installation
37 Multiroom Setup
37 Multiroom Operation
38 Tuner Operation
38 Basic Tuner Operation
38 Station Selection
38 Preset Tuning
39 RDS Operation
39 RDS Tuning
39 RDS Display Options
39 Program Search
Table of Contents
Typographical Conventions
In order to help you use this manual with the remote control, front-panel controls and rear-panel
connections, certain conventions have been used.
EXAMPLE – (bold type) indicates a specific remote control or front-panel button, or rear-panel
connection jack
EXAMPLE – (OCR type) indicates a message that is visible on the front-panel information display
1
– (number in a square) indicates a specific front-panel control
0
– (number in a circle) indicates a rear-panel connection
0
– (number in an oval) indicates a button or indicator on the remote
å
– (letter in an oval) indicates a button on the Zone II remote
Declaration of Conformity
We, Harman Consumer International
2, route de Tours
72500 Château-du-Loir,
FRANCE
declare in own responsibility, that the product
described in this owner’s manual is in compliance
with technical standards:
EN 55013/6.1990
EN 55020/12.1994
EN 60065:1993
EN 61000-3-2/4.1995
Carsten Olesen
Harman Kardon Europe
09/03
40 Programming the Remote
40 Programming the Remote with Codes
40 Direct Code Entry
40 Auto Search Method
41 Code Readout
41 Macro Programming
42 Programmed Device Functions
42 Volume Punch-Through
42 Channel Control Punch-Through
43 Transport Control Punch-Through
43 Reassigning Device Control Selectors
43 Resetting the Remote Memory
44 Function List
46 Troubleshooting Guide
46 Processor Reset
47 Technical Specifications