Filter
Top Products
8 FRONT PANEL INFORMATION DISPLAY
Front Panel Information Display
Q
Speaker/Channel Input Indicators:These
indicators are multipurpose, indicating either the
speaker type selected for each channel or the
incoming data-signal configuration.The left, cen-
ter,right,right surround, left surround,right back
surround and left back surround speaker indica-
tors are composed of three boxes, while the sub-
woofer is a single box.The center box lights when
a “Small” speaker is selected, and the two outer
boxes light when “Large” speakers are selected.
When none of the boxes are lit for the center,sur-
round or subwoofer channels, no speaker has
been selected for that position.(See page 21 for
more information on configuring speakers.) The
letters inside each of the center boxes display
active input channels. For standard analog inputs,
only the L and R will light,indicating a stereo
input.When a digital source is playing,the indica-
tors will light to display the channels begin
received at the digital input.When the letters
flash,the digital input has been interrupted. (See
pages 23 and 34 for more information on the
Channel Indicators).
R
Preset Number/Sleep Timer: When the
tuner is in use, these numbers indicate the spe-
cific preset memory location in use. (See page 40
for more information on preset stations.) When
the Sleep function is in use, these numbers show
how many minutes remain before the unit goes
into the Standby mode.
S
Preset Indicator:This indicator lights when
the tuner is in use to show that the Preset
Number/Sleep Timer
R
is showing the sta-
tion’s preset memory number.(See page 40 for
more information on tuner presets.)
T Sleep Indicator:This indicator lights when
the Sleep function is in use.The numbers in the
Preset Number/Sleep Timer
R
indicators
will show the minutes remaining before the
AVR 4500 goes into the Standby mode.
(See page 31 for more information on the Sleep
function.)
U
Memory Indicator:This indicator flashes
when entering presets and other information
into the tuner’s memory.
V Stereo Indicator:This indicator illuminates
when an FM station is being tuned in stereo.
W
Tuned Indicator:This indicator illuminates
when a station is being received with sufficient sig-
nal strength to provide acceptable listening quality.
X Auto Indicator:This indicator illuminates
when the tuner’s Auto mode is in use.
Y Main Information Display:This display
shows messages relating to the status, input
source, surround mode, tuner,volume level or
other aspects of the AVR 4500’s operation.
Z Mute Indicator:This indicator illuminates
to remind you that the AVR 4500’s output has
been silenced by pressing the Mute button
˚
f
. Press the Mute button again to return
to the previously selected output level.
AA
TA Traffic Announcement Indicator:
This indicator illuminates if the RDS station
tuned somtimes transmits traffic information
(see page 41 for more information on RDS).
AB
RT Text Indicator: This indicator illumi-
nates when the RDS station tuned is transmit-
ting radiotext (RT) data.
AC
Clock Time Indicator:This indicator illu-
minates when the RDS station tuned is transmit-
ting the CT (clock time) code, indicating the cur-
rent time of day.
AD
PTY Indicator:This indicator illuminates
when the RDS station tuned is transmitting pro-
gram type data,or during a PTY search.
AE
RDS Indicator:This indicator illuminates
when the station tuned is transmitting RDS data.