Filter
Top Products
SYSTEM CONFIGURATION 23
SYSTEM CONFIGURATION
input and surround mode will be different from one
input to the next, while the speaker type, night mode
and output level settings will usually be the same and
may be quickly entered by entering the same data
used for the original input.
Once the settings outlined on the previous pages have
been made, the AVR 225 is ready for operation.While
there are some additional settings to be made, these
are best done after you have had an opportunity to lis-
ten to a variety of sources and different kinds of pro-
gram material. These advanced settings are described
on pages 30–31 of this manual. In addition, any of
the settings made in the initial configuration of the unit
may be changed at any time.As you add new or dif-
ferent sources or speakers, or if you wish to change a
setting to better reflect your listening taste, simply fol-
low the instructions for changing the settings for that
parameter as shown in this section.
Having completed the setup and configuration process
for your AVR 225, you are about to experience the
finest in music and home theater listening. Enjoy!