Filter
Top Products
ENGLISH
31
Playing the contents of a memory card
1 Insert the memory card carefully into the card slot »SD/MMC«
(under the panel on top of the hi-fi), with the contacts facing to
the rear.
2 Switch on the hi-fi and use »FUNCTION« to select »SD CARD«
as the input source.
– Display: »SD READ« flashes, then MP3 mode with the total
number of albums and files in stop mode.
– If there is no memory card in the card slot, »NO DEV« appears
in the display.
3 Press »
ı
II« to start playback.
– Playback starts with the first file of the first album.
Note:
For MP3 operation with memory cards, the same playback and
search functions (except the resume function) are available as
for CD mode (see pages 24 to 30).
Playing the contents of an MP3 player or USB
memory stick
1 Plug the USB cable or the plug of the USB memory stick into the
USB interface »USB« (under the panel on top of the hi-fi).
2 Switch on the hi-fi and use »FUNCTION« to select »USB« as
the input source.
– Display: »USB READ« flashes, then MP3 mode with the total
number of albums and files in stop mode.
– »NO DEV« appears in the display if there is no device con-
nected or the device is not detected.
3 Press »
ı
II« to start playback.
– Playback starts with the first file of the first album.
Note:
For MP3 operation with an MP3 player or a USB memory stick,
the same playback and search functions (except the resume
function) are available as for CD mode (see pages 24 to 30).
Notes:
The USB interface of this hi-fi system is a standard interface. All
currently known MP3 chip concepts were taken into account
when it was developed. Due to rapid developments in MP3
technology and new manufacturers appearing every day, the
compatibility of MP3 players/USB memory sticks can only be
partially guaranteed.
If USB operation is impaired or is not possible, this does not
indicate a malfunction of the hi-fi system.
SD/MMC AND USB MODE ________________
14:31
SD READ
16:45
USB READ