Grundig cirflexx UMS 5400 DEC Stereo System User Manual


 
22
RDS station service
RDS (Radio Data System) is an information system which is transmit-
ted additionally by most FM stations.
When the hi-fi system is receiving an RDS channel, the channel
name, for example »FANTASY«, and »f« appear in the dis-
play.
Note:
It may take some time before all the RDS information is avail-
able.
Searching for RDS stations
1 To search for an RDS station, press »
5a
« or »s6« repeatedly
until »f« appears in the display indicating that an RDS
station is being received.
– After a short time the station name appears if the reception is
sufficiently strong.
RDS time synchronisation
Some RDS stations transmit an RDS time signal. If the reception is
good, this time information will update the time.
Time synchronisation can take several minutes, and even with good
reception the accuracy depends on the time signal being transmit-
ted. Automatic setting is always activated when the hi-fi is switched
from standby to tuner mode and receives a suitable RDS channel.
Viewing RDS information
When an RDS channel is being received, the frequency is displayed
briefly and then the station name appears continuously.
1 Press »DISPLAY« on the remote control.
– The programme type appears in the display (PTY).
2 Press »DISPLAY« on the remote control again.
– The radio text (TEXT) appears in the display as ticker text.
3 Press »DISPLAY« on the remote control again.
– The current time and day of the week appear in the display.
4 Press »DISPLAY« on the remote control again.
– The wavelength and the frequency appear in the display.
5 Press »DISPLAY« on the remote control one last time.
– The channel name is displayed continuously.
TUNER MODE _______________________________________
02
FANTASY
f
PROG
!
02
FM 100.60
f
PROG
!
02
INTERNET:WWW.RADIO-FAN
f
PROG
!
MHz