Filter
Top Products
ENGLISH
17
Setting and storing radio channels
Automatic station search (ASP)
The automatic station search looks for the 40 stations with the best
reception and stores them.
1 Start the automatic search in tuner mode by pressing and
holding down »PROG./RAND./
Ȅ«.
– Display: »FM«, the frequency in rapid run-through and »PROG«.
– The search has started. After the search has finished, you will
hear the station stored at preset position 01.
Notes:
The automatic station search can be interrupted by briefly
pressing »■«.
The automatic station search can be repeated any time by
pressing and holding down »PROG./RAND./
Ȅ« until the
frequency display switches to rapid run-through. The stations
stored previously will be deleted.
Automatic station search
1 Switch on the hi-fi system by pressing »TUNER/BAND«.
– Display: »TUNER«, then the wave band and frequency or
channel name.
2 Press »TUNER/BAND« to select the frequency band
(FM or MW).
– Display: »FM« or »MW«.
3 Activate the station search by pressing »
c
TUNING/
ALBUM
x
« until the frequency display changes to rapid run-
through.
– The search stops when a channel is found.
Manual station search
1 To move the frequency forward in steps, briefly press
»
c
TUNING/ALBUM
x
« several times.
– The frequency changes in 50 kHz steps.
SETTINGS ______________________________________________
02
FM 97.55
16
TUNER
MHz
FM 87.65
MHz
PROG
f
16
ENERGY
f
PROG
!