Filter
Top Products
ENGLISH
21
Selecting the TUNER input source
1 Press »FUNCTION« to select the input source.
– The most recently selected channel is activated (Last Station
Memory).
– Display: e.g. »FM 100.60« or »ENERGY«.
Selecting a preset channel
1 Press »BAND« to select the frequency band (FM or MW).
2 Select the channel position with »
5a
« or »s6«.
– Display: »PROG« and, for example, »02« and the frequency
or the channel name.
Stereo/mono reception
When the hi-fi system receives FM stereo channels, »ɳ« appears in
the display. If the signal from the FM stereo channel is weak, you
can improve the sound quality by switching to mono reception.
1 Press »FM MODE« on the remote control to switch to mono
reception.
– Display: »
ɳ« disappears.
2 To switch back to FM stereo, press »FM MODE« on the remote
control.
– Display: »
ɳ«.
Note:
If you store radio stations as presets, the stereo/mono setting is
also transferred (see page 18). You can then store a radio sta-
tion specifically as a stereo or mono channel.
Automatic station search (ASP)
By starting the automatic station search, you can delete all the
existing presets and replace them with new ones at the same time.
1 Start the automatic search in tuner mode by pressing and
holding down »PROG./RAND./
Ȅ«.
– After the search has finished, you will hear the station stored
at preset position 01.
Note:
The automatic station search can be interrupted by briefly
pressing »
7«.
TUNER MODE _______________________________________
15
ENERGY
f
PROG
!
02
VILRADIO
f
PROG
!
02
FANTASY
f
PROG
!
03
FM 93.25
MHz
PROG