Filter
Top Products
7.2 30BActivating the Radio
NOTE
During the activation process do not change channels or pages during this time.
The G600 will need to be on the XM INFORMATION page of the AUX Group when you call for
activation. Press the soft key under LOCK and the following window will appear. See
XFigure 7-1X.
Call 1.800.985.9200 and the XM operator will ask you for your Data Radio ID and Audio Radio ID.
Activation should begin once the XM operator has all your information. During activation the XM
Information page will show the various Weather Products being activated. The activation process is not
complete until a valid service class is shown. Once activation has been completed, verify that the Service
Class and Weather Products shown are the services that you purchased. If you are satisfied that you
received the products you requested, press the soft key under LOCK. This will bring up a small inset
window as shown in
XFigure 7-3X. Rotate the small MFD knob to YES and press the ENT key lock in your
activation.
Figure 7-3. Lock Activation Screen
7.3 31BVerifying Subscribed Services
When the data radio (weather receiver) has been activated, the subscription level will be shown in the
service class field. See
XFigure 7-1X. Rotate the large MFD knob to the XM Radio page. Press the CH-
and CH+ soft key to verify that the channel changes. You should see a complete listing of all the
channels of your subscription as shown in
XFigure 7-4X.
Figure 7-4. Channel Listings Screen
XM Activation Procedures Page 29
190-00355-04 Rev. H