Filter
Top Products
3.2 13BActivating the Radio
The G1000 needs to be on the INFO page for activation. Call 1.800.985.9200 and the XM operator will
ask you for your Data Radio ID and Audio Radio ID. Activation should begin once the XM operator has
all your information. During activation the INFO page will show the various Weather Products being
activated. The activation process is not complete until a valid service class is shown. Once activation has
been completed, verify that the Service Class and Weather Products shown are the services that you
purchased. If you are satisfied that you received the products you requested, press the soft key under
LOCK. This will bring up a small inset window as shown in
XFigure 3-4X. Press the ENT key lock in your
activation.
NOTE
During the activation process do not change channels or pages during this time.
Figure 3-4. Lock Activation Screen
3.3 14BVerifying Subscribed Services
When the data radio (weather receiver) has been activated, the subscription level will be shown in the
service class field. To see what products are available with your subscription level, see
XTable 3-1X or
XTable 3-2X. You can see that the activation was successful by pressing the soft key under RADIO. You
should see a complete listing of all the channels of your subscription as shown in
XFigure 3-5X.
XM Activation Procedures Page 9
190-00355-04 Rev. H