Filter
Top Products
4 zūmo 500/550 Owner’s Manual
GETTING STARTED
A) To install the U-bolt and handlebar
base:
1. Place the U-bolt around the handlebar,
and thread the ends through the handlebar
base.
2. Tighten the nuts to secure the base. Do
not overtighten.
B) To install the handlebar base to the clutch/brake clamp bracket:
NOTE: Both 1/4” standard and M6 bolts are included. Match the size of the
factory bolts on your clutch/brake clamp bracket.
1. Remove the two factory bolts
on your clutch/brake clamp
bracket.
2. Thread the new bolts through
the handlebar base, spacers,
and clamp bracket.
3. Tighten the bolts to secure the
base.
Handlebar
base
Handlebar
U-bolt
Clutch/brake
clamp bracket
Handlebar
base
Spacers