Filter
Top Products
2. OPERATION
2-15
Edit
Delete
7. Press ▲ or ▼ to choose Delete, and then press the ENT key.
The message “Delete station?” appears.
8. Press ◄ to choose “Yes”, and then press the ENT key to close the edit
window.
9. Press the MENU/ESC key several times to close the menu.
2.14 Icons
The NX-700 shows various icons to denote equipment status, and these are as
shown in the table below.
Icon Status Meaning
Status icon (shown at the tip of display)
Blinking
Shows that an International frequency (518 kHz)
message has not been read.
L1
Blinking
L2
Blinking
Shows that a Local frequency message has not
been read.
L1: 490 kHz, L2: 4209.5 kHz
I Blinking
L1 Blinking
L2
Blinking
Appears while receiving a message.
I: International frequency (518 kHz)
L1: 490 kHz
L2: 4209.5 kHz
Lighting
Displayed when the voltage of the internal battery is
low. The message “Battery error” also appears on
the display.
X
Lighting
Print error (no paper, not connected to the printer,
etc.). The message “Printer error” also appears on
the display.
P
R
Lighting While printing.
Message icon (shown next to messages)
NEW
Lighting
Displayed when message is displayed for the first
time.
(This icon disappeared after showing the detail or 24
hours has passed.)
SAR Lighting Displayed when message type D (SAR) is displayed.
!!
Lighting
Appears when message type A, B or L (Warning) is
displayed.
Lighting Protected message