Filter
Top Products
Customising the digital surround processor
30
Each source has an appropriate DSP preset associated with it
for each music format. For example, for a standard stereo (PCM)
signal the CD source uses Trifield and the TV source uses TV
Logic.
This section explains how to change the DSP preset associated
with any source.
To change the DSP preset for a
source
● Make sure the menus are unlocked; see To unlock the menus,
page 22.
● Select the source you want to change, by pressing the
Source key on the front panel or the appropriate source
button on the remote; eg CD.
● If necessary, select a signal in the appropriate format. For
example, to change the DSP preset used for DTS compact
discs, play a DTS CD.
● Press > or < to display the DSP preset currently associated
with that source.
For example:
Music
● Press A or V until the display shows the new DSP preset you
want to store.
For example:
Trifield
● Press Store to save the new association.
The display shows the source and
preset you have stored; for example:
CD=Trifield
After a short delay the display will revert to the normal display of
DSP preset and volume.
Changing the DSP preset for a source