Filter
Top Products
Customising the digital surround processor
26
Note that this adjustment is not available for the Mono or
Academy presets.
To change the relative level of the rear
or side loudspeakers
● Press > or < until the display shows the speaker(s) you want
to adjust.
For example:
Rear +0
● Press A or V to change the relative level of the speakers, in
dB.
You can change the relative loudness of the rear loudspeakers
from -30dB (about one-eighth of the loudness) to +10dB (about
double the loudness).
For example, to double the loudness of the loudspeakers:
● Adjust their level until
the display shows:
Rear +10
Note that this adjustment is not available for the Direct, Stereo,
Mono, or Academy presets.
A conventional stereo system provides a single balance control,
which changes the relative loudness of the two speakers. The
565 Digital Surround Processor provides a more sophisticated
adjustment which corresponds to moving the listening position
to the left or right.
You can also change the level of the centre, side, or rear
loudspeakers relative to the main speakers.
To move the listening position to the
left or right
● Press > or < until the display shows
the current balance; for example:
Balance <0>
● Press A or V to move the listening position.
The display shows the direction and position of the listening
position.
For example:
Balance <8
The arrow indicates the direction, and the number indicates the
position where 0 is central, 8 is line with corresponding main
speaker, and 10 is fully to one side.
Changing the listening position