Filter
Top Products
Customising the digital surround processor
24
Parameter Range Default What it changes
Treble * † -10dB to +10dB +0dB The slope of the frequency response.
Bass * † -5dB to +5dB +0dB The bass response.
Phase * + or - + The phase of all loudspeakers.
Balance <10 to 10> <0> The L-R balance.
Centre -3dB to +3dB +0dB The level of the centre.
Depth -2.5ms to +5ms +0.0 The relative delay of the centre.
Rear -30dB to +10dB +0dB The relative level of the rears.
Sides -30dB to +10dB +0dB The relative level of the sides.
R Delay 15ms to 30ms 0.0 The relative delay of the rears.
S Delay 15ms to 30ms 0.0 The relative delay of the sides.
LipSync 0ms to 30ms 0.0 The sync. delay.
OSD * Off, Low, Med, High Low The position of the on-screen display.
* These parameters apply to all DSP presets.
† Note that these parameters appear on the speakers if you are using DSP loudspeakers.
Standard parameters