Filter
Top Products
SW6 VGA Audio • Remote Control
Remote Control, cont’d
3-8
SW6 VGA Audio Switcher
A
Appendix A
Reference Information
Specifications
Part Numbers
Contact Closure Remote Control
The Remote connector also provides a way to select an input
to the switcher using a remote contact closure device. Contact
closure control uses pins on the Remote connector that are not
used by the RS-232 interface. Figure 3-5 shows the contact
closure pin assignments.
REMOTE
PIN
RS-232
Contact
Closure
Function
1
— In #1 Input #1
Input #2
Input #3
Input #4
Input #5
Input #6
2
TX — Transmit data
3
RX — Receive data
4
— In #2
5
Gnd Gnd Ground
6
— In #3
7
— In #4
8
— In #5
9
— In #6
Figure 3-5 — Remote connector pinout
To select a different input number using a contact closure device,
momentarily short the pin for the desired input number to logic
ground (pin 5). To force one of the inputs to be always selected,
leave the short to logic ground in place. The short overrides
front panel input selections.
IR 102 Infrared Remote Control
The optional Extron IR 102 kit consists of the following
components:
• IR 102 handheld remote control unit
• VersaTools IR 102 remote receiver with 3' cable and RS-232
connector
• IR detector with 6' cable and captive screw connector
• External 12 VDC power supply
Install and operate the remote control in accordance with the
IR 102 User’s Guide included with the remote.
L 1R L2 R L3 R L4 R L5 R L6 R L1R
IR 102 Remote
Control Receiver
IR 102 Remote Control
IR Detector
3' Cable
6' Cable
Power
Supply
RS-232
Control
SW6 VGA Audio Switcher
IR-102
+10
IR 102
Figure 3-6 — IR 102 Remote application