Filter
Top Products
SW6 VGA Audio • Installation and Operation
Installation and Operartion, cont’d
2-12
SW6 VGA Audio Switcher
Resetting all audio levels
To reset the audio level to 0 dB for all inputs, press and hold the
Audio Configuration/Save button. The Audio Configuration/
Save LED begins to blink after approximately 1 second.
Continue to hold the button for approximately 10 seconds until
the LED turns off. All input audio levels are reset to 0 dB.
3
Chapter Three
Remote Control
Simple Instruction Set Control
Windows
®
-Based Program Control
Contact Closure Control
IR 102 Infrared Remote Control