Filter
Top Products
3-21
MGP 464 • Operation
PRELIMINARY
Internal Temperature screen
The Internal Temp submenu displays the unit’s current internal temperature. The
MGP 464 displays the temperature in degrees Fahrenheit and Celsius. This is an
information-only screen; no adjustments can be made on it.
Factory Default submenu
This submenu lets you reset the MGP 464 to the default settings with which it was
delivered from the factory. Press the Detail button to initiate the reset.
Adding and Conguring Window Text
You can add a text box or label, containing up to 16 characters, to each window.
You can also specify several parameters for the text label, including text size and
color, label background color, label border color, and the position of the text box on
the screen.
These window text specifications cannot be made from the front panel. You
can create and congure the label using the Windows-based control software
or SIS commands via the RS-232/422 rear panel port (see chapter 4, “Software
Conguration and Control”), or using the MGP 464 Web pages (see chapter 5,
“HTML Conguration and Control”).
Picture Controls
The MGP 464 has six picture control buttons located on the front panel to the left of
the menu button. You can use these buttons to adjust size, position, brightness and
contrast, color and tint, detail, and magnification (zoom). See the Picture Controls
table on the next page for an explanation of these buttons’ functions.
N
Picture controls are window-dependent. You set the values separately for each
window.
N
For Window/Image Size, Window/Image Position, and Window Image Zoom,
pressing the button repeatedly switches back and forth between window settings
and image settings.
Adjusting the picture controls
Make image adjustments to an input by using the picture control buttons on the
front panel. When you select one of these buttons, the button for the most recently
selected window lights, indicating that the window is being adjusted.
To adjust the picture controls,
1. Press the Window Select button to select the window you want to adjust.
2. Press the Input button for the input that you want to adjust, if it is not
currently selected.
3. Press the button for the desired picture control: Window/Image Size
(sizing), Bright/Cont (brightness and contrast), Detail (sharpness),
Window/Image Position (moving and centering), Color/Tint (color quality),
or Window/Image Zoom (magnication).
4. Rotate the horizontal Adjust (
[
) and/or vertical Adjust ({) knobs to select a
level from the available range.
5. Repeat steps 1 through 4 for each image adjustment to be made for the
selected input/window.
N
The LCD screen may display “NA” in place of a number if that adjustment does
not apply to the input’s video format.