Extron electronic MGP 464 HD-SDI Stereo Receiver User Manual


 
A-3
MGP 464 • Specications, Part Numbers, and Accessories
PRELIMINARY
Standards ........................................ NTSC 3.58, NTSC 4.43, PAL, SECAM, SMPTE 292M
Input level ..................................... 0.0 V to 5.0 Vp-p
Output level ................................... 0.6 Vp-p for component video (tri-level sync)
TTL: 5.0 Vp-p, unterminated for RGBHV, RGBS
Input impedance .......................... 510 ohms
Output impedance ....................... 75 ohms
Polarity............................................ Positive or negative (selectable)
Control/remote — processor/decoder/scaler
Serial control port ......................... (1) RS-232 or RS-422, 9-pin female D connector
(1) RS-232, 2.5 mm stereo mini jack
Baud rate and protocol ................. 300 to 115200 baud (default: 9600), 8 data bits, 1 stop bit, no parity
Serial control pin configurations
9-pin D connector .............. RS-232: 2 = TX, 3 = RX, 5 = GND
RS-422: 2 = TX-, 3 = RX-, 5 = GND, 7 = RX+, 8 = TX+
2.5 mm mini stereo jack .... Tip = TX, ring = RX, sleeve = GND
Ethernet control port..................... 1 RJ-45 female connector
Ethernet data rate .......................... 10/100Base-T, half/full duplex with autodetect
Ethernet protocol ........................... ARP, DHCP, ICMP (ping), TCP/IP, Telnet, HTTP, SMTP
Program control ............................. Extron’s control/conguration program for Windows
®
Extron’s Simple Instruction Set (SIS
)
Microsoft
®
Internet Explorer, Telnet
General
Power ............................................. 100 VAC to 240 VAC, 50-60 Hz, 30 watts, internal
Temperature/humidity ................ Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling ........................................... Fan, right to left (as viewed from the front panel)
Rack mount .................................... Yes, with included brackets
Enclosure type .............................. Metal
Enclosure dimensions .................. 3.4" H x 17.5" W x 12.0" D (2U high, 1 rack wide)
(8.6 cm H x 44.5 cm W x 30.5 cm D)
(Depth excludes connectors and knobs. Width excludes rack ears.)
Product weight .............................. 8.5 lbs (3.9 kg)
Shipping weight ........................... 18 lbs (9 kg)
Vibration ........................................ ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety ................................... CE, CUL, UL
EMI/EMC .......................... CE, C-tick, FCC Class A, ICES, VCCI
Environmental ................... Complies with the appropriate requirements of WEEE.
MTBF ............................................... 30,000 hours
Warranty ........................................ 3 years parts and labor
All nominal levels are at ±10%.
Specifications are subject to change without notice.