Filter
Top Products
DVI 201 Tx/Rx • Reference Information
Reference Information, cont’d
DVI 201 Tx/Rx • Reference Information
A-4
A-5
Maximum level (Hi-Z)
DVI 201 A D Tx .................. >+16 dBu, balanced or unbalanced at
1% THD+N
DVI 201 A D Rx .................. >+9.8 dBu, unbalanced at 1% THD+N
Maximum level (600 ohm)
DVI 201 A D Tx .................. >+9 dBm, balanced or unbalanced at
1% THD+N
DVI 201 A D Rx .................. >+6.8 dBm, unbalanced at 1% THD+N
Control/remote — external device (pass-through)
Serial control port input
Transmitter ......................... RS-232 via (1) 3.5 mm, 3 pole captive screw
connector
Receiver .............................. 1 set of proprietary signals on a female
RJ-45 jack
Serial control port output
Transmitter ......................... 1 set of proprietary signals on a female
RJ-45 jack
Receiver .............................. RS-232 via a 3.5 mm, 3 pole captive screw
connector
N
Protocol is mirrored between the transmitter and the receiver.
Serial control pin configurations . Captive screw connectors: 1 = TX, 2 = RX,
3 = GND
General
External power supply ................. 100 VAC to 240 VAC, 50/60 Hz, 6 W max.,
external; to 12 VDC, 1 A, regulated
Power input requirements ........... 12 VDC, 0.4 A for both transmitter and
receiver
N
Each transmitter or receiver can be powered either locally by an external
power supply or remotely by receiver or transmitter on the other end of
the CAT 5/5e/6 or STP (shielded twisted pair) cable.
Temperature/humidity ................ Storage: -40 to +158 °F (-40 to +70 °C) /
10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) /
10% to 90%, noncondensing
Cooling ........................................... Convection, unvented
Rack mount
DVI 201 TX, DVI 201 RX
Yes, with optional RSU 129 or RSB 129
1U 9.5"rack shelf, part #60-190-01 or
60-604-01; RSU 126 or RSB 126 1U 6" deep
rack shelf, part #60-190-10, 60-604-10;
RSF 123 or RSB 123 or VersaTools
®
3.5"rack
shelf, part #60-190-20 or 60-604-20.
Also furniture mountable with optional
MBD 129 Through-Desk Mounting Kit,
#70-077-02, or attachable to a projector
mount using optional PMK 300 kit
#70-374-01 or PMK 350 #70-526-02 or -03.
DVI 201 A D TX, DVI 201 A D RX
No, but wall or furniture mountable in a
Decora
-style opening
Enclosure type .............................. Metal
Enclosure dimensions
DVI 201 Tx/Rx .................. 1.0" H x 4.3" W x 3.0" D
(quarter rack wide)
2.5 cm H x 10.9 cm W x 7.6 cm D
(Depth excludes connectors.)
DVI 201 A D Tx/Rx
Faceplate ..................... 2.6" H* x 1.3" W x 0.1" D
(6.6 cm H* x 3.3 cm W x 0.3 cm D)
(Fits the opening in a 1 gang Decora
faceplate. *Height is 3.8" [9.7 cm] including
mounting tabs.)
Buffer .......................... 2.7" H x 1.8" W x 0.75V D*
(6.9 cm H x 4.6 cm W x 1.9 cm D*)
(*Depth excludes connectors.)
Product weight .............................. 0.5 lbs (0.3 kg)
Shipping weight ........................... 3 lbs (2 kg)
Vibration ........................................ ISTA 1A in carton
(International Safe Transit Association)
Listings............................................ UL, CUL
Compliances ................................... CE, FCC Class A**, VCCI, AS/NZS, ICES
MTBF ............................................... 30,000 hours
Warranty ........................................ 3 years parts and labor
N
*An optional HDMI to DVI adapter is required if an HDMI signal is
used. Also, an optional Extron HDMI-to-DVI adapter is required in
order to transmit a CEC signal.