Filter
Top Products
DVI 201 Tx/Rx • Reference Information
Reference Information
DVI 201 Tx/Rx • Reference Information
A-2
A-3
Specifications
Video input and loop-through — transmitters
Number/signal type ..................... 1 DVI-D/HDMI* input, 1920x1200
@ 60 Hz max. resolution
1 DVI-D/HDMI* local loop-through
Connectors
DVI 201 Tx/Rx................... 2 DVI-D female
DVI 201 A D Tx/Rx ........... 2 DVI-I female
Interconnection between transmitter and receiver
Connectors ..................................... 2 RJ-45 per unit for 2 CAT 5/5e/6 or
STP (shielded twisted pair) cables
connecting the transmitter and receiver
Termination standards.................. TIA/EIA T 568A or T 568B. Pin
configurations for each standard are
available in the manual’s installation
chapter.
Bit rate ............................................. 5 gigabits/second total (1.65 gigabits/
second/color)
Signal transmission distance
1920x1200 @ 60 Hz (the highest resolution of the single link DVI
standard)
STP (shielded twisted pair cable)
125' (38 m)
CAT 5/5e/6 cable ...... 100' (30 m)
HDTV (1080i or 720p) or 1024x768 @ 60 Hz
CAT 5/5e/6 or STP (shielded twisted pair) cable
200' (60 m)
N
The transmission distance varies greatly depending on the signal
resolution and on the type of cable, graphics card, and display used in
the system.
Video output — receivers
Number/signal type ..................... 1 DVI-D/HDMI*, 1920x1200 @ 60 Hz max.
resolution
Connectors
DVI 201 Tx/Rx................... 2 DVI-D female
DVI 201 A D Tx/Rx ........... 2 DVI-I female
Audio — DVI 201 A D Tx/Rx
Gain ................................................ Unbalanced output: 0 dB;
balanced output: +6 dB
Frequency response ..................... 20 Hz to 20 kHz, ±0.05 dB
THD + Noise ................................. 0.10% @ 1 kHz at nominal level
S/N ................................................. >85 dB at maximum output (unweighted)
Stereo channel separation ........... >86 dB @ 1 kHz
Audio input — DVI 201 A D Tx/Rx
Number/signal type
DVI 201 A D Tx .................. 1 stereo, unbalanced
DVI 201 A D Rx .................. 1 stereo, balanced/unbalanced
Connectors
DVI 201 A D Tx .................. (1) 3.5 mm mini audio jack (tip, ring,
sleeve)
DVI 201 A D Rx .................. (1) 3.5 mm captive screw connector, 5 pole
Impedance
DVI 201 A D Tx .................. >10k ohms unbalanced, DC coupled
DVI 201 A D Rx .................. >18k ohms unbalanced, 14k ohms
balanced, DC coupled
Nominal level
DVI 201 A D Tx .................. -10 dBV (316 mVrms)
DVI 201 A D Rx .................. +4 dBu (1.23 Vrms)
Maximum level
DVI 201 A D Tx .................. +11 dBu, unbalanced at 1% THD+N
DVI 201 A D Rx .................. +16.8 dBu, unbalanced at 1% THD+N
N
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV
≈
2 dBu
Audio output — DVI 201 A D Tx/Rx
Number/signal type
DVI 201 A D Tx .................. 1 stereo, balanced/unbalanced
DVI 201 A D Rx .................. 1 stereo, unbalanced
Connectors
DVI 201 A D Tx .................. (1) 3.5 mm captive screw connector, 5 pole
DVI 201 A D Rx .................. (1) 3.5 mm mini audio jack (tip, ring,
sleeve)
Impedance
DVI 201 A D Tx .................. 50 ohms unbalanced, 100 ohms balanced
DVI 201 A D Rx .................. 50 ohms unbalanced