Filter
Top Products
DVI 201 Tx/Rx • Installation and Operation
Installation and Operation, cont’d
2-14
DVI 201 Tx/Rx • Installation and Operation
2-15
Final installation
After testing and making any adjustments, do the following:
1. At the power outlet, unplug the power supply.
N
One power supply can power both the transmitter and
the receiver, so only one unit needs a power supply.
2. Mount the transmitter or receiver into the wall box, and
attach the supplied Decora faceplate to the unit, as shown
in figure 2-11.
Wall opening
is flush with
edge of box.
Wall Box
Decora
Faceplate
Extron
DVI 201 A D
D
V
I
A
U
D
I
O
I
N
IN
P
U
T
T
x
R
x
R
S
-
2
3
2
P
A
S
S
T
H
R
U
Figure 2-11 — Mounting the transmitter or receiver
3. At the power outlet, reconnect the power supply. This
powers up both units.
Connections
Transmitter connections
The rack-mountable transmitter is in a quarter rack width
enclosure. The wall-mountable transmitter is in an enclosure
that can be mounted in UL standard wall boxes with Decora
®
-
style face plates.
Figure 2-12 shows the front panel of both DVI 201 Tx models.
Figure 2-13 shows the rear panel of both models.
DVI 200 Tx Series
DVI INPUT LOCAL OUTPUT
DVI 201 Tx Front Panel
DVI 201 A D Tx Front Panel
INPUT
Rx
Tx
RS-232
PASS THRU
DVI
AUDIO L+R
4
21
1
3
Figure 2-12 — DVI 201 Tx front panel connectors